Skip to content
Radon County Map

Data sources

Every county figure on this site comes from the files below. The snapshot was retrieved on 2026-11-19. Refresh it with npm run fetch-radon, which rewrites data/radon.json.

EPA Map of Radon Zones, text version

U.S. Environmental Protection Agency

JSON text version dated June 2024 on the EPA page (file name radon-zones-202406.json). The map itself was developed in 1993. The June 2024 text version includes Broomfield County, Colorado, as Zone 1. A zone is a predicted county average, not a radon measurement in a house.

Source file · EPA page

Retrieved 2026-11-19. U.S. government work, public domain in the United States.

National County 2020 codes

U.S. Census Bureau

2020 county and county-equivalent names and FIPS codes for the 50 states and the District of Columbia. Connecticut is the eight counties in that file, not the 2022 planning regions. Territories are not zoned by the EPA map and are omitted.

Source file

Retrieved 2026-11-19. U.S. government work, public domain in the United States.

County adjacency file

U.S. Census Bureau

Neighbor counties, excluding the county itself. Kusilvak Census Area uses the file's Wade Hampton Census Area row (FIPS 02270), and Oglala Lakota County uses the Shannon County, South Dakota row (FIPS 46113). Both are renames of the same area. Chugach and Copper River are not given the old Valdez-Cordova neighbor list, because that census area was split.

Source file

Retrieved 2026-11-19. U.S. government work, public domain in the United States.

EPA Map of Radon Zones and Supplemental Information, state radon contacts

U.S. Environmental Protection Agency

Program name, website, phone, and the published contact on each state table. Puerto Rico, the Virgin Islands, and Guam are on the page and are not used, because this site has no county pages for them.

Source file

Retrieved 2026-11-19. U.S. government work, public domain in the United States.

Minnesota radon testing by county, 2016–2025

Minnesota Department of Health, Environmental Public Health Tracking

County rows from the embedded download table. MDH says the percent columns are the share of tested properties with one or more tests at or above 2 pCi/L and at or above 4 pCi/L. The download labels those columns with an equals sign. Statewide figures used here are the published seasonal averages, the published count of counties in each average-radon bin, and the published annual count of properties tested. Two statewide arithmetic-mean rows in the same file are unlabeled beyond the measure name (3.8 and 1.3) and are not shown. Post-mitigation tests are excluded. One test is counted per property per year. Results come from eleven laboratories and are not every radon test in the state. A county figure is a summary of tested properties, not the EPA zone and not a prediction for an untested house.

Source file · About the data

Retrieved 2026-11-19. Minnesota public health data published for download by the Minnesota Department of Health. No separate license statement is printed on the download page.

Radon Test Results By County: Beginning 1987

New York State Department of Health, Bureau of Environmental Radiation Protection

Short-term charcoal tests distributed through the NYSDOH Radon Program, by county and by floor (basement or first floor). Rows labeled out of state are not a county and are dropped. The file has a New York County row and no separate row for Bronx, Kings, Queens, or Richmond counties, so those four pages do not show a state measurement. The percent at or above 4 pCi/L is the sum of the published count for results at or above 4 and under 20 pCi/L and the published count for results at or above 20 pCi/L, divided by the published number of homes tested, and only when those three buckets add up to the homes tested. NYSDOH says these rows do not include the roughly 30,000 to 40,000 tests a year in New York that were not purchased through the state program. The API field named Highest (pCi/L) returned the county name, so the highest value shown is the separate Highest Reading field.

Source file · Dataset page

Retrieved 2026-11-19. Published on NY Open Data by the New York State Department of Health.

Not included

Places without a county page

Yellowstone National Park, Clifton Forge, South Boston, and the former city of Bedford are EPA rows that are not current Census counties. Their zones are not copied onto a neighboring county that already has its own zone. Hoonah-Angoon Census Area has no EPA row. Broomfield County is in the June 2024 EPA text version as Zone 1, so it does have a page.